Best Case For Cooling of February 2021

Case Type ATX Full Tower

Front Tempered Glass+Aluminum

Side Tempered Glass

M/B Type EEB(35 5cm x 35 5cm)/ ATX/ Micro-ATX

Internal 4 x 3 5" HDD(Hot Swap) 11 x 2 5" SSD

New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation

Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive

STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling

Motherboard support: Mini-ITX, MicroATX, and ATX

Keeps insulin cool and safe in Summer; insulates against cold of Winter

Refrigeration NOT required

Simply activate with cold water

Re-useable

Light & Compact

The best case out there for the Raspberry Pi 4 according to Mag Pi Issue 90.

Cools the Raspberry Pi as a heatsink and comes with a 30mm software controllable fan.

Minimizes clutter and makes cable management easy with all ports on the rear of the case.

The power button behind can perform a safe shutdown, reboot, or forced shutdown upon installation of proprietary script.

The GPIO pins are accessible on top of the case and protected by a removable magnetic cover.

Designed for Unhindered Gaming Performance: Built from the ground up to reduce heat buildup common in most other cell phone cases, aiding long-term battery health and boosting overall smartphone performance

Industry-First, Thermaphene-Based Heat Dissipation: Redirects trapped heat through a thermally conductive lining adjacent to vented airflow channels to significantly improve cooling compared to traditional cases

Wireless Charging Compatible: Works seamlessly with Qi-certified phone chargers

Network-Performance Optimized: Offers thermal protection without impacting internet connectivity, ensuring smooth gameplay and video streaming

Drop-Test Certified Up to 10ft: A scratch-resistant backplate with shock-absorbant side walls allow the Razer Arctech case to protect against most minor accidents

Motherboard Support :HPTX .XL-ATX E-ATX (12" x13"EEB), ATX, m-ATX, mini-ITX. (System is not included)

Efficient Cooling Solution: Five pre-installed fans, including four 120 mm RGB LED Fans in the Front and one 120mm RGB Fan in the Rear provides great cooling and dynamic cyber gaming atmosphere, Removable Dust filter in the front and top, and under the PSU for easy maintenance.

Extreme Roomy Internal Space: Graphics Card Length: 530 mm / 20.8 inches, CPU Cooler Height: 190 mm / 7.4 inches ,Radiator Support : 480/420/360/280/240 mm on top or 360/280/240 mm in front , Vertical Graphic Card support:max thickness 49mm/1.93in.

Tempered Glass Design: Three High quality 5 mm thickness tempered glass panels on the front, and sides of the case. Connectivity: USB 3.0 x 2, USB 2.0 x 2, Audio In/Out, Reset button and Remote RGB Fan Controller.

Easy to use and RGB Ready : the fan hub allow you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion /Fusion 2.0 (5V addressable 3pins header on motherboard).

Designed for Unhindered Gaming Performance: Built from the ground up to reduce heat buildup common in most other cell phone cases, aiding long-term battery health and boosting overall smartphone performance

Industry-First, Thermaphene-Based Heat Dissipation: Redirects trapped heat through a thermally conductive lining adjacent to vented airflow channels to significantly improve cooling compared to traditional cases

Wireless Charging Compatible: Works seamlessly with Qi-certified phone chargers

Network-Performance Optimized: Offers thermal protection without impacting internet connectivity, ensuring smooth gameplay and video streaming

Drop-Test Certified Up to 10ft: A scratch-resistant backplate with shock-absorbant side walls allow the Razer Arctech case to protect against most minor accidents

【Intelligent Speed Control】3 ×120mm full function PWM silent fans adopt wolf claw bionic design helps wind diversion to increase air convection efficiency and greatly improve heat dissipation. Stable operation and reduce noise. The intelligent temperature control mute module controls the speed at 1000~2000±10% RPM.

【Multi-mode Light Effect】Monochrome glow, monochrome change and rainbow effect.Each fan is equipped with 8 ARGB LED beads, 6 colors and 10 light effect modes.One click to change the RGB color.Provide complete lighting for your computer.Through the control box or motherboard software control to create your own unique case lighting effects.

【Motherboard Synchronization & Controller】The motherboard software synchronization mode, build your own light effect control system. Support ASUS, Gigabyte, MSI main software synchronization control (Gigabyte motherboards need RGB adapter cable/includeded）. Support FRGB controller and FRGB SYNC motherboard (+5V/3 PIN pin) software to synchronize two lighting control methods.

【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case.

【Top Bearing Technology】 Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs.Suitable for CPU cooler and support 120/240/360 mm liquid cooler.(case /GPU etc）

Higher air flow to enhance cooling performance

Economic solution for perfect performance

RoHS compliance for protecting the environment

3 IN 1 Value Pack

Ultra silent operation at 19 dBA

Pre-installed with 4 dual Ring RGB 120mm case fans; adjustable 7 static colors, 2 backlight effects and 1 rainbow RGB mode via top I/O LED button

Front mesh design aesthetics increase case ventilation, promote great airflow and maintain low system temperatures

Builders-friendly layout for quick and Easy PC builds; featuring PSU shroud and optional vertical GPU card mount with support bracket

Optional 360mm AIO liquid cooler support in front; optional 240mm radiator clearance on top fits best when low profile Memory is installed; supports up to 170mm tall CPU cooler